News, Opinions, Tips & Tricks about 3D technologies
Posts Tagged ‘Handyscan 3d’
Getting the HandyPROBE and Handyscan 3D to collaborate
By: Julien Marchand
18 Mar 2010Since the introduction of the HandyPROBE, this device has been functioning in a third-party inspection software, such as PowerInspect or Polyworks. This requirement made it hard to combine both the probing results from the HandyPROBE with the mesh file from the Handyscan 3D. However, since VxScan 4.0, this integration is much easier.
In VxScan 3.1, we [...]
- No Comments
- Tags: HandyPROBE, Handyscan 3d, VxScan
About this blog
This blog is definitely about innovation - about new technologies, new methodologies, new projects and new outcomes.
Through this blog, we will reach to the whole Creaform community and share info about the 3D world – our world.
Categories
- 3D Scanning Projects (29)
- 3D Technologies (43)
- 3D Hardware (12)
- 3D Software (11)
- Aerospace (1)
- Business (20)
- Design and Engineering (7)
- Education (5)
- Heritage Preservation (1)
- Metrology and Inspection (17)
- Reverse engineering (7)
- Tips and Tricks (3)
- Travel (1)
- Uncategorized (1)
Archives
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- August 2010
- July 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- control dimensional 3D: a similar aplication [...]
- ruediger benedikt: i just wanted to say i really love these articles we are really not aware how creative human being c [...]
- Michelle: I also want experience to design an interior of an train or an air plane. This task might be really [...]
- biren padhya: I am digitizer of print media here in india and have a keen interest in conservation of heritage si [...]
- Harley Gershey: The penmanship refinement is higher-ranking and the import is relevant. Thanks benefit of the acumen [...]
- What a beauty shot!
- BOEING 737 – Enhanced Interior Design Through 3D Imaging
- Creaform and Camoplast: Jig Control During Production
- Enhancing 3D Scanning with Photogrammetry
- Product Manager Dan Brown’s Column in Quality Digest
- The green side of Creaform: how we helped in building an electrical car
- Technological Fundamentals, or how Creaform builds 3D optical measuring systems
- Creaform Technologies – 2 newcomers!
- Win a free 3D Engineering Projet (valued at $20,000)
- Handyscan 3D Product Manager Daniel Brown Strikes Again