Archive for December, 2011
BOEING 737 – Enhanced Interior Design Through 3D Imaging
By: Isabelle Roy
In: 3D Hardware| 3D Scanning Projects| 3D Technologies| Design and Engineering| Reverse engineering
20 Dec 2011An international company and global leader in business aviation service has turned to 3D modeling of the plane’s interior to design, produce, and assemble Boeing 737 BBJ2 furnishings.
The project consisted of 2 steps: conducting a full scan of the plane interior and creating 3D model files. To complete the 1st step, a team of Creaform [...]
Creaform and Camoplast: Jig Control During Production
By: Isabelle Roy
15 Dec 2011Camoplast’s Polymer Solutions group is a leading provider of thermoplastics and Thermoset systems, as well as components for premium manufacturers and motor vehicle OEMs. Camoplast’s Roxton Falls division was looking for a quality control solution for its drilling jigs during production to ensure compliance on a regular basis.
Camoplast’s objectives:
Control jig bending and wear
Target potential bending [...]
About this blog
This blog is definitely about innovation - about new technologies, new methodologies, new projects and new outcomes.
Through this blog, we will reach to the whole Creaform community and share info about the 3D world – our world.
Categories
- 3D Scanning Projects (40)
- 3D Technologies (50)
- 3D Hardware (18)
- 3D Software (11)
- Aerospace (2)
- automotive (2)
- Business (24)
- Corporate Branding (1)
- Design and Engineering (9)
- Education (7)
- Heritage Preservation (5)
- Manufacturing (2)
- Metrology and Inspection (22)
- Non Destructive Testing (NDT) (1)
- Probing (3)
- Rapid prototyping (2)
- Reverse engineering (9)
- Tips and Tricks (3)
- Travel (1)
- Uncategorized (1)
Archives
- May 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- July 2012
- April 2012
- March 2012
- February 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- August 2010
- July 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- Isabelle Roy: Hello Rigo, In fact, we got the basic shape by doin a surface reconstruction based on a mock-up pro [...]
- Rigo: Very nice work. I'm working on a helmet on SolidWorks though, I can't seem to build the basic shape [...]
- audi car mats: Good article! We will be linking to this great post on our site. Keep up the great writing. [...]
- Isabelle Roy: Es posible exportar .txt archivos con X, Y, Z coordenadas, así: 0.01306962 -0.02769774 0.0 [...]
- Isabelle Roy: Hello! Yes, in theory it can, but of course, the size of the space between the reference points wil [...]
- The HandyPROBE – a reliable crewmember you can count on!
- Refresh on the MaxSHOT 3D coordinate measuring system for photogrammetry
- Popcorn & Soda Time! New HandyPROBE and MetraSCAN 3D Videos!
- Rio Tinto Iron & Titanium: improving analysis methods with the Handyscan 3D
- When Go!SCAN 3D meets crab!
- We even help scan… mastodons!
- Creaform and Bonhomme Carnaval – Together Once Again!
- Pipecheck is in the (big) news!
- Put Us to the Test…Once More!
- Simplifying inspection while increasing precision – How Olympus makes the most out of their HandyPROBE!