Science fiction of 3D laser scanning

ACCURACY AND RESOLUTION IMPROVEMENT

When we think of future laser scanning, first thing that comes in mind is an accuracy and resolution improvement. But this is not the big deal…

 First parameters to consider are from an engineering point of view and are limited by price and engineering capabilities. Structural rigidity of the scanner itself has virtually no limitations if we consider new materials (ceramics) and new geometries (thermo stablility, stiffness etc). Cameras are getting more and more pixels and optics gets very high quality (price will surely lower with time).

 When talking about accuracy the real problem comes from physics limitations. This is what will ultimately stop accuracy improvement. Since surface geometry is acquire from laser light, first physical limitation to consider is wavelength of laser. Actually there is a physic theorem that states it is impossible to observe details smaller than wavelength used. Right now lasers used in 3D scanning are all visible light (between 400 and 700 nm). Maybe future laser scanners will use shorter wavelength such as UV?

 Another limitation comes from light interaction with matter. When light passes close to a sharp edge it is diffracted making the laser line to split into diffraction patterns. Light is not always reflected on the first layer of atoms of the material (what is the physical boundary between an object and space surrounding it anyway?). These considerations make it really hard to estimate the maximum accuracy achievable. Moreover when entering the physical considerations, it seems that material composition could affect precision itself.

 FORESEEN IMPROVEMENTS FOR 3D LASER SCANNING

 For 3D scanning used in Reverse Engineering (RE) and Inspection, we can foresee that the real next major evolution step will be live features recognition. Intelligent software improvement would permit to recognize, in real time, the actual geometry that is scanned. This could permit automatic reconstruction for RE, automatic alignment with CAD when inspecting and moreover it could eliminate needs for targeting! Imagine that the software recognize the parts it is scanning as a solid object: it would make it possible for the software to know where measurement is actually being taken on the part. This is truly artificial intelligence, but new development in this area (3D object reconstruction from pictures) forecast real developments right on the corner.

 Who will be first to release such technology?